62 inch wingspan
Fully functioning, 3 piece flaps
Six Futaba S3004 servos installed - 1 each for the rudder and elevator, and 2 each for the ailerons and the flaps.
Top Flite dummy scale radial engine kit installed.
Top Flite scale cockpit kit installed.
Steerable tail wheel linked to the rudder.
Ready to fly - you just need to add a receiver and 6 cell (6S) LiPo battery.
I built this airplane from the Top Flite Gold Edition kit. It is made from balsa and plywood. It is fully sheeted except for the rudder and elevator. I covered with 0.5 ounce fiberglass and Minwax Polyurethane, which is a water based coating. Then lightweight primer and sanded to fill the weave. Finished it with Warbird colors flat latex paint. The result is a lightweight, authentic finish.
Before I finished the build, I decided to convert the airplane to electric power. This airplane is powered by a Hobby King Aerodrive 5065, 320kV motor and a Plush 80 amp esc. Propeller is an APC 18x10. I have built in an access hatch on the top so that the battery pack can be changed without removing the wing or even turning the airplane upside down.
Weight without battery is 8 pounds, 6 ounces. My watt-meter shows 1000 watts plus at full throttle, giving about 100+_watts per pound.
This airplane has never been flown and is ready to go. It is unique and beautiful.
do NOT contact me with unsolicited services or offers